The GPS Series is an industrial duty pressure swing adsorption (PSA) regenerative air dryer that delivers a reliable -40° pressure dewpoint with optional designs for -100°. The standard series is optimized for capacities of 25 to 3,000 SCFM
Compressed Air Filtration
Home
> Compressed Air Filtration
In one cubic foot of atmospheric air, there are millions of particles that are potentially harmful to your machines and equipment. Roughly 80% of the contaminates are so small that they will easily pass through your compressor’s intake filter and into your compressed air lines, causing frequent and expensive downtime of your pneumatic equipment. To combat this issue, Great Lakes Air has developed a comprehensive range of filter grades to maintain your compressed air system integrity while balancing filtration efficiency with energy efficiency.
High Efficiency Coalescing Filtration Grade – H
- High Quality Compressed Air Filtration
- Particle Removal Down to 0.01 Micron
- Max. Oil Carryover 0.008 PPM w/w
- Clean Dry Pressure Drop 1.4 PSID
- Oil Saturated Pressure Drop 3.0 PSID
- ISO 8573 (Class 1)
Utility Coalescing Filtration Grade – PC
- General Compressed Air Filtration
- Particle Removal Down to 0.1 Micron
- Max. Oil Carryover 0.09 PPM w/w
- Clean Dry Pressure Drop 1.0 PSID
- Oil Saturated Pressure Drop 2.0 PSID
- ISO 8573 (Class 2)
Particulate Filtration Grade – PP
- Particulate Removal
- Particle removal down to 1 Micron
- Clean Dry Pressure Drop 1.0 PSID
- Outside/In Element Flow
- ISO 8573 (Class 3)
Mist Eliminator Filtration Grade – M
- Particulate Removal
- Particle removal down to 1 Micron
- Clean Dry Pressure Drop 1.0 PSID
- Outside/In Element Flow
- ISO 8573 (Class 3)
Carbon Adsorption Filtration Grade – V
- High purity extended surface area activated carbon removes hydrocarbon mist and vapor
- Max. Oil Carryover 0.003 PPM w/w
- Nominal Pressure Drop 1.0 PSID
GPS -Heatless Regenerative Dryers
- NEMA 12 Electrical
- Illuminated Power Switch
- US Manufactured Activated Alumina
- Desiccant Fill & Drain Ports
- Adjustable Purge Flow w/Indicator
- Control Air Filter
- ASME Relief Valves
- OSHA Approved Mufflers
- 2-Year Equipment Warranty
- Optional Dewpoint-Demand Energy Management System
GEH – Externally Heated Regenerative Dryer
The GEH Series utilizes a low watt density Incoloy sheath heater to increase operational efficiency and reduce required purge air to 7% or less. The standard series is designed for capacities of 100 to 25,000 SCFM
- NEMA 12 Electrical
- US Manufactured Activated Alumina
- Desiccant Fill & Drain Ports
- Adjustable Purge Flow w/Indicator
- Control Air Filter
- ASME Relief Valves
- OSHA Approved Mufflers
- Insulated Heater & Purge Piping
- Incoloy Sheath Heater
- Heater Over-temp High Limit System
- 5-Year Heater Warranty
- 2-Year Equipment Warranty
- Optional Dewpoint-Demand Energy Management System
GBS Blower Purge Regenerative Compressed Air Dryers
The GBS Series utilizes an atmospheric blower and low watt density Incoloy sheath heater to increase operational efficiency and eliminate required purge air in the Blower Only Mode. The standard series is designed for capacities of 100 to 25,000 SCFM. The standard Tri-Mode system allows an operator to select a mode of operation at any time. The selectable modes are Blower Only, Blower Polishing, and External Heated.
- Tri-Mode Operating System
- NEMA 12 Electrical
- US Manufactured Activated Alumina
- Desiccant Fill & Drain Ports
- Adjustable Purge Flow w/Indicator
- Control Air Filter
- ASME Relief Valves
- OSHA Approved Mufflers
- Insulated Heater & Purge Piping
- Incoloy Sheath Heater
- Heater Over-temp High Limit System
- 5-Year Heater Warranty
- High Efficiency Regenerative & Centrifugal Blowers
- 2-Year Equipment Warranty
- Optional Dewpoint-Demand Energy Management System